Flat Shipping

Flat Frakt kl NOK165

På bestillinger over NOK1500

JUSTRITE 12020 Suction Option Assembly sed with Disconnect Assembly for 1/4 Inch ID Tube, Stainless Steel | AA4ZUT 13M369

JUSTRITE 12020 Sugealternativenhet med frakoblingsenhet for 1/4 tommers ID-rør, rustfritt stål

På lager
Vare: AA4ZUT Modell: 12020Kryssreferanse: 13M369

Få tak i det Mai 10, Fredag

Leveringsmuligheter:

Int. Økonomi (6-10 dager)
  • Int. Økonomi (6-10 dager)
  • Int. Ekspress (5-7 dager)
  • Pickup fra fabrikk

Produkt tilgjengelig for flat frakt. Fast fraktpris på NOK 165 på transaksjoner med verdi NOK 1500 eller mer og samlet vekt under 10 pund.

3 035 NOK / enhet
Legg i handlevognen
Be om prisoverslag

Betalingsalternativer tilgjengelig

Leveringsalternativer tilgjengelig

Teknisk spesifikasjon:

SakSugeopsjonsenhet
MaterialeRustfritt stål
UnderkategoriVentilasjonstilbehør

Fraktinformation:

Skipets vekt (kg) 0.45
Skipets høyde (cm)10.16
Skipets lengde (cm)17.78
Skipets bredde (cm)12.7
HS kode7307225000
OpprinnelseslandUS

Produktdetaljer:

Custom Quick-Disconnect Disposal Cans can be designed with up to eight fittings. You select the size, fitting material and position, and O-ring seal material to meet your needs. A minimum of two disconnect fittings is required, one intake and one vent. Unless otherwise specified, vent fitting on all cans will be the same as intake fitting. Stainless Steel Fitting for 1/4-in (6mm) ID tubing: Based on your application choose polytetrafluoroethylene (PTFE), Viton? or EPDM seals with 1/4-in (6mm) flow. Stainless Steel Fitting for 3/8-in (10mm) ID tubing: Based on your application choose polytetrafluoroethylene (PTFE), Viton? or EPDM seals with 1/4-in (6mm) flow. Polypropylene Fitting for 3/8-in (10mm) ID tubing: This fitting is equipped with EPDM seals with 1/4-in (6mm) flow. Suction Option Assembly: Internal 1/4-in (6mm) ID polytetrafluoroethylene (PTFE) tubing with stainless steel fitting is installed below disconnect (of your specification) to allow for safe dispensing of fluid out of the can. NOTE: must be used under suction only. Note: This item is only available for purchase with a custom Quick-Disconnect Disposal Can

Egenskaper:

  • Suction option assembly
  • Must be used with disconnect assembly

Utforsk produkter

Kontakt

Kontakt din kontoadministrator med en gang for å få personlig råd.
Vi er tilgjengelige mandag til fredag, Fra 07:30 til 17:00.

JUSTRITE 12020 Sugealternativenhet med frakoblingsenhet for 1/4 tommers ID-rør, rustfritt stål
3 035 NOK / enhet